Notes on installing door hinges
2019-11-30 09:07:30

Installing door hinges is very particular about paying attention to some details. Check the matching with door frame and fan before installation. In addition, different hinges need to be used for different doors. Although we often ignore it in life and it seems unimportant, it is very critical. It carries the whole life and cannot be underestimated.


I hope the following introduction is helpful to everyone's installation, and I have a clearer understanding of the hinge.


1. When the two sheets of the door hinge are not symmetrical, it should be discriminated which sheet should be connected to the door leaf, which sheet should be connected to the door frame, and the side connected to the three sections of the shaft should be fixed to the frame. The side connected to the two sections of the shaft should be fixed to the frame.


2. First, measure the size of the door leaf, install the door hinge on the door leaf, and then perform the binding of the door frame. During the installation process, in order to avoid the door leaf rubbing the ground, use the bottom of the article under the door leaf, and then fix the position. When installing, ensure the same The hinge axis on the door leaf is on the same vertical line to prevent the door leaf from springing.


3. The connection method should match the material of the frame and the fan. For example, the hinges used for steel-framed wooden doors are welded on the side connected to the steel frame and fixed on the side with wooden screws.


BACK

Previous: No

Next: Door hinge installation