One of the steps in installing a hinge is positioning, which is the earliest and most important step in the entire installation project. Its positioning is not simply positioning, but requires relevant professionals to carry out according to the size of the door, the size of the hinges, and taking into account issues such as bearing capacity, in order to finally find an accurate positioning and facilitate the subsequent work to start normally.
The second step in installing the hinge is the slotting, which is performed after the positioning work is completed. Everyone must be careful when slotting. In this process, we must carefully observe the change in the depth of the groove. It should not be opened too shallow to prevent the door from closing. It should not be opened too deep to prevent cracks between the door and the door frame.
One step of installing the hinge is fixed, it is performed after the above two steps are successfully completed. This step of fixing is actually very simple, that is, first fix the left side of the hinge to the door, then the right side of the hinge to the door frame, and then use a small screwdriver to fine-tune it.